The proper use of a plate leveling machine requires adjusting multiple parameters. Here, the editorial team at Dongfang Machinery will analyze this from three key aspects:
Pressure: If the pressure is insufficient or excessive, adjust the pressure-regulating knob located at the rear of the machine. Turning it clockwise increases the pressure; turning it counterclockwise decreases the pressure.
Time: When the hot stamping time is reached and the buzzer does not sound or sounds continuously, the timer needs to be adjusted to the appropriate position.
Temperature: When the set temperature is reached, the thermostat pointer should indicate the "185°C" position (approximately 5 minutes to reach). If the temperature gauge rises after powering on but the heating plate does not heat up, please check the electrical circuit.
When the handle is pressed all the way down and it automatically rises back up upon release, turn the adjustment knob downward to correct this. After hot stamping is completed, if lifting the handle upward feels strenuous, the adjustment knob should also be turned downward.
For more information about plate leveling machines, please visit http://www.dfjq.com
| 
